The vertical blinds we sell are a modern take on an old classic; with no messy chains or cords they’re extremely safe for children and pets. Let me show you how easy it is to install.

Take the brackets supplied with your blinds. These brackets are for recess fit, and these brackets are for face fit.

Face Fit:

For face fit, screw the outer brackets approximately 2cm in from the edge and the top of the bracket flush with the top of the architrave.

Recess Fit:

For recess fit, screw the outer brackets approximately 2cm in from the edge and the front in line with the front of the window frame. The remaining brackets to be spaced evenly spaced between them.

Grab the track and insert the front end into the bracket, roll back and click the back of the track into place.

If you ever need to remove your track, just press this tab here to release the back of the track and roll back to the front.

Twist the rods so the clips which hold the vertical panels are 90 degrees to the wall.

Hang the vertical panels one at a time.

Test the operation of the blind.

If your panels ever get out of shape, you can re-align them by twisting all the way to the left, then all the way to the right and your blinds should be perfectly aligned again.

So, it’s that easy! If you’ve got any questions or you think you’ve got a scenario different to what we’ve show you here today, then feel free to call our customer service team 24 hours a day: 1300 195 797. Or email us and we’ll get back to you as soon as we can.

NEED DIY ADVICE?

Free technical advice and guides.

DiY Measure &
installation Videos